Margins - ENCAD 215319-1 User Manual

®
CADJET 3D User Guide

Margins

Margins can be set to Normal or Expanded. The Expanded setting expands the print
area and decreases the margins.
Any part of the image that extends into the margin will be clipped. When the Margins
option is set to Expanded, make sure that you align the media accurately using the
guide on the right of the platen so that the ink doesn't exceed the edge of the media.
Cut sheet maximum printing area
Normal: 0.59" (15 mm) margin on each of three sides and 1.38"
(35 mm) margin on the fourth side.
Expanded: 0.197" (5 mm) margin on each of three sides and a 1.38"
(35 mm) margin on the fourth side.
Rollfeed maximum printing area
Normal: 0.59" (15 mm) margin on all sides.
Expanded: 0.197" (5 mm) margin on all sides.
Printer Options 2-10