Rotation; Reprints - ENCAD 215319-1 User Manual

Rotation

The printer automatically prints an image with the long side on the paper axis.
To better fit images and save media, you can use the Rotation option to turn
vector files counterclockwise 90 degrees at a time. If the rotation specified won't
fit on the media or contains raster images, it will not be rotated. When the
Rotate value is set to AUTO, the algorithm will automatically rotate the plot if it
determines that the rotation will save media (regardless of whether Nesting is
enabled). If Rotate is set to 0, the plot will not be rotated. The Control function
does not override the RO command in the plot file.
Note: Rotation is supported for HPGL/2 files only. It is not supported for RTL
files.
To rotate the image
From the main menu, press Setup Menu/HPGL/2 menu/Rotation.
1
From the Rotation menu, choose the rotation angle (0, 90, 180, 270,
2
auto) and press OK.

Reprints

You can print up to 99 copies of a specific vector file. When Reprint is set to 0,
only one image is printed.
To make multiple prints
From the main menu, press Setup Menu/HPGL/2 menu/Reprints.
1
On the Reprints menu, enter the number of reprints (0 to 99) and
2
press OK.
®
CADJET 3D User Guide
HPGL/2 4-4