Heidi Driver - ENCAD 215319-1 User Manual

Heidi driver

Use the Heidi driver to print files created with AutoCAD 2000. Details on the print
options are included in the on-line help provided with the driver.
Á
To print from the Heidi driver:
1 Open the document from AutoCAD 2000 or LT 2000.
2 Choose File/Print.
3 Select a printer.
4 Change basic print options, such as number of copies and page range, as
needed. When a print option is available in your application's Print dialog
box, set it with your application.
5 Open the printer properties dialog box and change the driver print settings as
needed. For more information, refer to the on-line help.
Device and Document Settings
Source: Select "Roll" or "Sheet" feed media source.
Width: The width setting is unused.
Size: Select media size. Most media sizes have four similar listings for combinations of
normal or expanded margins and long or short edge feed of the media. Expanded mar-
gins provide the maximum possible image area on the media. Expanded margins are
indicated by the word "expand" in the media size. Normal margins provide a larger
border area around the image. When media size is listed with the shorter dimension first,
then the short edge of the media should be fed into the printer, and the short edge will be
the leading edge out of the printer. When media size is listed with the longer dimension
first, then the long edge of the media should be fed into the printer, and the long edge
will be the leading edge out of the printer.
Note that this media feed direction is different than the image orientation (portrait or
landscape). Set the image orientation at plot time on AutoCAD's "Plot Settings" page.
Portrait orientation puts the bottom of the image at the short edge, and landscape puts
the bottom of the image at the long edge of the media.
Max Plot Area: This reports the maximum plot area or image area that will be avail-
able on the selected paper size. The Max Plot Area depends on the paper source (roll or
sheet), margins (normal or expanded), and the media feed direction (short or long edge
feed).
®
CADJET 3D User Guide
Printing 3-8