ENCAD 215319-1 User Manual page 66

Ink Option Menu
l
Ink Reduction
l
Ink Preheat
l
l
Ink reduction
Ink preheat
Dry time
Exit
Serial Comm Menu
l B a u d R a t e
l D a ta Bits
l
P a r ity B it
l
Baud rate
Parity bits
Exit
Dry Time
Exit
provides access to a further menu in which to set the percentage by
which to decrease the amount of ink emitted to help prevent bleeding
or pooling of ink. Options are 0, 12.5, 25, 37.5, and 50.
provides access to a further menu in which you can select the
cartridge for which you want to set the preheat value. Then you can
set the ink preheat value for each cartridge. Options are -4 (off) to 3
(max).
provides access to a further menu to select the dry time in the range
of 0 seconds (default) to 60 minutes. When enabled, the printer
waits the selected amount of time after printing before cutting the
media or advancing to the next print.
returns to the Setup menu.
E x it
provides access to a further menu to select the baud rate: 9600
(default), 19200, 38400.
provides access to a further menu to select parity: None (default),
Even, Odd.
returns to the Setup menu.
l
l
l
l
l
l
l
l
CADJET ® 3D User Guide
Menu Tree C-9