Technical Information - ENCAD 215319-1 User Manual

Technical information

MEDIA TYPES:
Photo paper, paper matte, drafting films,
and specialty.
MEDIA ROLL PARAMETERS
Inner roll core: 2" and 3"
Max. outside roll diameter: 4" and 6"
Max. roll width: 36"
RESOLUTION:
600 x 600 dpi
300 x 300 dpi
FEATURES:
Rollfeed with cutter
8 user-savable settings
Power PC 33 MHZ processor
ink cartridges (4)
500 ml ink reservoirs (4)
Ink priming system
LINE LENGTH ACCURACY:
+/- 0.2% in paper and carriage axis using
roll feed, 4 mil drafting matte film.
Image frame length (X-axis) variation +/-
0.2% and width (Y-axis) variation +/-0.06%
+/- 0.024" (.6mm).
BUFFER:
Two 72-pin, 32-bit wide DRAM sockets.
64 MB standard
User upgradeable to 128 MB
60 ns or faster, ENCAD approved.
INTERFACES:
Bidirectional Parallel (IEEE 1284)
RS-422
422 to 9 pin 232 for self-service
100BaseT
BAUD RATES:
9600; 19200; 38400
POWER:
180-264 VAC 48-63 Hz
Consumption:
20 W Idle
100 W Typical
150 W Maximum
OPERATING ENVIRONMENT:
41° - 95°F (5°- 35°C)
20-80% RH, Non-condensing
STORAGE ENVIRONMENT:
-5° - 140°F (-21°- 60°C)
5-80% RH, Non-condensing
CERTIFICATIONS:
Safety
CSA, CSE/NRTL,
(equivalent to UL1950)
TUV GS
EN 50 082-1
EN 60 950
UL1950
NOM-019-SCFI-1993
IEC 950
AS/NZS 3260
EMI
FCC Class A
CSA C108.8
EN 55 022 Class A
CE Mark
CISPR 22- Class A
AS/NZS 3548
Made in the U.S.A.
D