Familiarizing The Webviewer Ptz Buttons - Avermedia XR8032 User Manual

Enable/disable to show the video. Even if the video of the selected camera is hidden
you can still record the video and preview it in playback mode.
- Name
Change the camera name.
- Description
Add a short comment.
(4) Video Adjustment
Adjust the Brightness, Contrast, Hue and Saturation of the selected camera.
(5) Recording Setting
Select the size of the video and click the
create. You can also activate the Enable Deinterlace to enhance the video quality. Set the
Enable Deinterlace mode to #1, if you are capturing motionless picture and #2, if it
captures lots of movement.
(6) Enable Audio
Select to assign the audio channel of the selected camera. You can only assign one audio
channel to one camera source. This way you can record both audio and video.
(7) Quality
Adjust the video quality. The higher the value, the lower the compression level and uses
more hard disk space.
(8) Frame Rate
Set the number of images per second of the video to be recorded. The frame rate ranges
from 1 to 30 for NTSC and 1 to 25 for PAL. The higher frame rate, it uses more hard disk
space.
6.2

Familiarizing the WebViewer PTZ Buttons

Name
(1) Direction
buttons
(2) Select PTZ
(3) AutoPan
Groups
Function
Adjust and position the focal point of the PTZ camera. Click the center
to pan automatically.
Choose to enable/disable the PTZ camera. In the Select PTZ dialog
box, Select column, click to enable/disable viewing and controlling the
PTZ camera.
Click OK to exit and save the setting and Cancel to exit without saving
the setting.
Operate the PTZ cameras automatically based on the selected
camera group preset position number.
button. The higher the size, the larger the file it
59
(1)
(5)
(2)
(6)
(3)
(4)