Removing A Jammed Document - GRAPHTEC CS2000 User Manual

5.5 Removing a Jammed Document

If a document becomes jammed in the scanner during scanning or another operation,
immediately turn off the scanner, remove the document hold-down unit, and then remove
the jammed document.
Procedure
(1) Turn off the scanner.
(2) Remove the document hold-down unit as described in Section 5.1, "Removing and
Mounting the Document Hold-Down Unit".
(3) If the document is jammed at the front, remove the document from the inside or by
pulling it forward.
CS2000
5. DAILY MAINTENANCE
5 – 7