Appendix C. Standard Specifications - GRAPHTEC CS2000 User Manual

APPENDIX C. STANDARD SPECIFICATIONS

Item
Document size
Effective scanning area
Document thickness
Optical resolution
Interpolated resolution
Main scanning system
Sub scanning system
Scanning speed 2
*
Scanning precision
*
Gradation
Light source
Interface
Output
Rated power supply
Operating environment
Power consumption
External dimensions
(approx.)
Weight
Standards
* 1
Documents up to approximately 16 m in length (driver software limitation) can be scanned. However, the actual
document length that can be scanned is limited by the available memory (hard disk or other data storage device)
of the computer to which the scanner is connected, and also by the grade of the medium being scanned.
* 2
Excluding data-transfer time
* 3
Notes on scanning precision
Scanning precision may vary slightly depending on the grade and thickness of the medium being scanned,
and on the operating conditions. The precision figures above were measured under the operating conditions
described below.
• Test chart used
• Guaranteed precision conditions
• Guaranteed scanning precision range : 1189 mm × 841 mm
• Document hold-down unit setting
CS2000
ANSI E to ISO A4 (all sizes centered)
Width : 914 mm (max. 1000 mm)
Length : 1189 mm (capable of long-length scanning)
1.5 mm or less (including the carrier sheet)
600 dpi
Main scanning direction : 200 dpi, 300 dpi, 400 dpi, 600 dpi
Secondary scanning direction : 200 dpi, 300 dpi, 400 dpi, 600 dpi,
Contact image sensor system (Five A4 sensors in a zigzag pattern)
Document travel (sheet through) system
Monochrome: Approx. 1.3 ms/line
3.8 inch/s at 200 dpi
1.9 inch/s at 400 dpi
1.26 inch/s at 600 dpi
Color: Approx. 3.9 ms/line
1.28 inch/s at 200 dpi
0.64 inch/s at 400 dpi
0.42 inch/s at 600 dpi
±0.1%, ±5 pixels
3
Monochrome: Bilevel, intermediate tones (dithering, error diffusion)
Gray : 256 shades
Color: 8-bit, 24-bit
LED (RGB)
SCSI-2
Image data
100 to 120/200 to 240 VAC ±10%, 50/60 Hz
Temperature: 10°C to 35°C, Humidity: 35% to 80% RH (no
condensation)
125 VA or less
× ×
1205 1020 600 mm (W
Approx. 48 kg (including stand)
UL, FCC Class A (USA); CE Marking (EU)
: Mylar sheet #200
: Temperature 20 ±3°C; humidity: 60% ±10% RH
: Standard
APPENDIX C. STANDARD SPECIFICATIONS
CS2000
800 dpi
× ×
H D) (including stand)
1
*
C – 1