GRAPHTEC CS2000 User Manual page 30

3. PREPARING TO OPERATE THE SCANNER
For Windows 95 Version B:
(the actual screen displayed may be different from the one shown, depending on which
version of Windows 95 you have)
(1) After checking that the scanner and the computer are properly connected via the SCSI
interface cable, turn on the scanner first and then turn on the computer.
(2) When Windows 95 has been booted, the window below appears.
(3) Click the Next button to initiate the computer's search for a new driver.
(4) When the new driver has been detected, the menu below appears. Click the Finish
button.
(5) The Windows 95 Desktop appears and the CS2000 is acknowledged by the computer.
3 – 8 CS2000