(5) Mount the document hold-down unit as described in Section 5.1, "Removing and
Mounting the Document Hold-Down Unit"
Do not use a commercial cleaner for office equipment, a glass cleaner, or chemical
solvents such as solutions containing alcohol.
Although the glass scanning table is not a maintenance part that requires periodic
replacement, it is a consumable part because its surface may receive slight scratches
due to minute particles of dust and other foreign matter. If document scanning produces
unsatisfactory results (unexpected white or black streaks in the data) due to scratches
on the glass table or other reasons, please perform the calibration procedure (see
Section 5.6, "Calibration"). If the scanning results do not improve after calibration,
the glass table will need to be replaced.
CS2000
5. DAILY MAINTENANCE
5 – 5