GRAPHTEC CS2000 User Manual page 5

Safety Precautions (Continued)
Do not connect the scanner to a non-rated power
supply.
• Use of a different supply voltage may result in a
fire hazard or electrical shock.
Be sure to ground the earth terminal.
• Unless the scanner is grounded, the operator could
suffer an electrical shock in case of current leakage.
Insert the scanner's power plug securely into the
electrical socket.
• After first connecting the power cord's female plug
to the scanner, connect its male plug to the electrical
socket.
• Using the scanner with its power plug incompletely
inserted into the electrical socket could cause a fire
hazard or electrical shock.
Do not allow dust or metallic matter to adhere to
the power cord's plug.
• If the power cord's plugs become dirty, thoroughly
wipe them clean.
• The use of a dirty power cord plug could result in
a fire hazard or electrical shock.
When the scanner will not be used for an extended
period, unplug its power cord from the electrical
socket.
• Leaving the scanner connected to a power supply
increases its risk of short-circuiting and overheating.
WARNING
Prohibited
CAUTION
Ground the
scanner
Securely insert
the power plug
into the socket
Prohibited
Beware of electrical shock
Unplug the power
cord from the socket
– iii –