Table of Contents
Advertisement
For Windows Me:
(1) Connect the CS2000 to the computer, turn on the CS2000 first, and then turn on the
computer.
(2) Once Windows Me has started up, the window shown below is displayed.
(3) Click on "Next" to search for the driver.
(4) Upon completion of the search for the driver, the window shown below is displayed.
Click on the "Finish" button.
(5) The Windows Me desktop is displayed, and the CS2000 is recognized by the computer.
For Windows NT 4.0:
(1) After checking that the scanner and the computer are properly connected via the SCSI
interface cable, turn on the scanner first and then turn on the computer.
CS2000
3. PREPARING TO OPERATE THE SCANNER
3 – 11
Advertisement
Table of Contents
