5.25-Inch Media Device - NEC TM1200 User Manual

5.25-Inch Media Device

CD-ROM devices contain a laser system and are classified
as CLASS 1 LASER PRODUCTS. To use these devices,
thoroughly read the documentation provided by the CD-
ROM manufacturer, and keep the documentation for future
reference. In case of any trouble with a CD-ROM, please
contact your nearest service representative. To prevent
direct exposure to the laser beam, do not try to open the
enclosure. Use of controls or adjustments or performance of
procedures other than those specified in the CD-ROM
manufacturer's documentation may result in hazardous
0.radiation exposure.
1. Power off the system, unplug the system power cord, and remove the appropriateside
panel depending upon the bay you are installing the media device in and as described
earlier in this chapter.
2. Open the front panel as described earlier in this chapter.
Observe static precautions. Use an antistatic wirst strap.
3. Remove the EMI metal shield and the filler panel covering the bay where you are
installing a media device as shown below. The metal shield is released by pulling on the
tabs at the left and right of the filler panel.
Removing the EMI Metal Shield and the Filler Panel
CAUTION
CAUTION
Upgrading Your System 4-21