Configure The Projector For The 3D Source - Christie D4K2560 User Manual

Installation and Setup

Configure the Projector for the 3D Source

1. Select the channel (from the Home tab) best suited for the 3D source.
2. To select the correct EDID timing, go to Main menu > Image Settings > EDID Timing
Select and select the required EDID timing.
3. Connect all the required cables between the 3D source and the projector.
4. Configure your 3D source.
22 D4K2560/Mirage 4K25 User Manual
020-101076-02 Rev. 1 (11-2013)