Adjust the Image
Color Correction
The D4K2560/Mirage 4K25 provides automatic and custom color adjustments via the Color
Correction menu. The available color adjustment controls are listed in the table below:
Menu
Max Drives
All color adjustments are turned off allowing the projector to run at maximum brightness.
Color
Allows the specification of a color temperature as expressed in degrees Kelvin. Standard
Temperature
settings are:
• 9300K - Close to the white of many computer monitors.
• 6500K - Standard for color video in both standard and HD formats.
• 5400K - Standard for graphics and black and white video.
• 3200K - Useful if the projected image is to be filtered, or shot as part of a studio set
illuminated with incandescent lighting.
HD Video
Sets the output color value to the HD video standard.
Custom
Allows custom color adjustments to be made by the projector operator.
Adjust Color by Temperature
Color temperature adjusts the overall color gamut and does not allow for precise
adjustments of specific primary colors.
1. Tap Menu Tab > Configuration > Color Correction > Select Color Adjustment.
2. Select Color Temperature from the list.
3. Tap Color Temperature.
4. Adjust the temperature value and tap OK.
Adjust Color by Precise Chromaticity Values
Adjusting the color chromaticity values will overwrite any settings applied in the Color
Saturation menu.
1. Tap Menu Tab > Configuration > Color Correction > Select Color Adjustment.
2. Select Custom from the list.
3. Tap Color Adjustments by X,Y.
4. Adjust the precise hues of each primary color component.
32
Description
D4K2560/Mirage 4K25 User Manual
020-101076-02 Rev. 1 (11-2013)