Connect A Video Source Using Hdmi; Connect A Video Source Via Dvi - Christie D4K2560 User Manual

Connect a Video Source Using HDMI

The Twin HDMI Input Card (THIC) accepts digital video data from HDMI sources. Various
configurations are supported.
Input
Configuration
Four-Port Enables connection of four HDMI cables to two THIC cards (using the
1-IN and 2-IN inputs of two cards in slots 1 and 2, or in slots 3 and 4).
Each HDMI input supplies one quadrant of a 4K input image. This
configuration supports high resolution and high frame rate input video
streams, including both 2D and 3D direct inputs.
Four-Port, Dual- May be used for Dual-Input 3D configurations. For information on the
Input 3D video quadrant mapping for the THIC four-point input configuration,
see
Single One-Port Enables connection of one HDMI cable to the 1-IN input of a THIC card
(in any slot). In this configuration, the HDMI input supplies the entire
video raster.
One-Port, Dual- May be used for Dual-Input 3D configurations.
Input 3D
For limitations of one card use for One-Port Dual-Input 3D, see
Connectivity

Connect a Video Source via DVI

The Dual Link DVI Input Card (DDIC) accepts digital video data from DVI sources. Various input
configurations are supported.
Input
Configuration
Four-Port Enables connection of four DVI cables to four DDIC cards. Each DVI
input supplies one quadrant of a 4K input image. This configuration
supports high resolution and high frame rate input video streams.
Single One-Port Enables connection of one DVI cable to the DVI input of a DDIC card
(in any slot). In this configuration, the DVI input supplies the entire
video raster.
D4K2560/ Mirage 4K25 User Manual
020-101076-02 Rev. 1 (11-2013)
Description
Four-Port Input Video Quadrant Mappings
on page 56 and
Description
on page 26.
Mirage Signal Connectivity
Connect Devices
Requirements
Two THIC cards
Four THIC cards
One THIC card
One or two THIC cards
D4K2560 Signal
on page 56.
Requirements
Four DDIC cards
One DDIC card
25