The partner printer must be configured to specific communication
settings. See "Configuring the Partner Printer" for more information.
Formats, fonts, graphics, and batches are limited to the amount of
available memory in the partner printer. If you send a batch that does
not print, check the available memory in the partner printer.
The display and test label for the partner printer do not indicate
Note:
that it is a partner printer.
For the primary printer, you see a line of data for "Smart Relay."
The #number indicates the next number in sequence for collation.
The r/c numbers indicate the row and column location for the collation
number. See Chapter 6, "Troubleshooting," for more information about
the test label.
C o n n e c t i n g t h e P r i n t e r s
Connect the serial cable 126089 from the 9-pin auxiliary serial port on
the primary printer to the 25-pin serial port on the partner printer.
Primary Printer
5-4 MonarchNet2 Operating Instructions
Use this serial port
Use this serial port
Partner Printer