20. Select Enable Web Authorization Timeout to make the Web pages
time out after five (5) minutes of inactivity.
The time out period is set for five minutes and cannot be
Note:
changed.
21. Select Enable HP Jet Admin if using HP Jet Admin. No other
settings are required for HP JetAdmin.
22. Click Save Changes to save changes or click Save/Re-init Network
to save the changes and re-initialize the network with the new
settings. Any changes made on this screen or other screens do not
take effect until you click Save/Re-init Network.
This process takes a few minutes.
Changing SNMP Settings
Only configure the settings required for your network/printer.
Click the SNMP tab to change SNMP settings.
1.
Enter the System Name, if it does not automatically appear.
2.
Enter the System Contact.
3.
3-12 MonarchNet2 Operating Instructions