Avery Dennison MonarchNet2 9855 Operating Insructions page 92

To stop printing the collation number on formats, use this command:
SET PRN REL COUNT NONE.
♦ The counter field appears in Bold, Reversed type - design formats
with the counter field's height and width in mind, so data is not
overwritten.
♦ The counter always counts to 9999 and then starts back at 0.
The value entered with the console command
(SET PRN REL COUNT 10) is the value used for the next label.
♦ The counter value is saved when you turn off the printer.
♦ Repeating a canceled batch uses the next number in sequence.
There is no way to decrement the counter.
♦ Batches sent to the partner printer from other sources (besides the
primary printer) are not incremented and have no
Smart Relay collation field.
If using the Smart Relay counter, do not use the Repeat Batch,
Note:
Cancel All, or Cancel Batch menu items. These items cause the
counter number to be incorrect. To set the counter to the correct
number, use the console command: SET PRN REL COUNT
xxxx, where xxxx is the correct number.
After you specify the row and column locations, the Smart Relay counter
field is automatically appended to your format. If you view the MPCL
data for the format, the Smart Relay counter field appears like this text
field:
T,750,4,V,10,5,0,2,2,2,R,L,0,0,0¦
Do not add field 750 to your formats. It is reserved for the Smart
Note:
Relay Field Position and automatically added to the format by
the primary printer.
5-8 MonarchNet2 Operating Instructions
Row Column values
Smart Relay Counter Field