Avery Dennison MonarchNet2 9855 Operating Insructions page 75

SHow PRN SUPply SYncsupply
Resynchronizes the supply.
SET PRN SYStem [POwerupmode/ LAnguage/
BAtchseparators/SLashedzero/SYmbolset] value
Sets the specified system parameter to the specified value.
SHow PRN SYStem {POwerupmode/ LAnguage/
BAtchseparators/SLashedzero/SYmbolset}
Shows the specified system parameter's current setting. If no parameter is
specified, it shows the current settings of all parameters in the system
category.
SET PRN SCRipts [LOad/ ENable/ DISable/ DELETE]
Loads, enables, disables, or deletes a script. Note that LOad, ENAble, DISable,
and DELETE take no arguments.
SET PRN SCRipts [ENQpollbeforescript/ IMmcmdbeforscript]
value
Sets the specified scripts parameter to the specified value.
SHow PRN SCRipts {STatus/ INfo/ ENQpollbeforescript/
IMmcmdbeforescript}
Shows the specified scripts parameter's current setting. If no parameter is
specified, it shows the currents settings of all parameters in the scripts
category.
SET PRN VERifier [STate/ SCanbeam/ CAbledetect] value
Sets the specified verifier parameter to the specified value.
SHow PRN VERifier {STate/ SCanbeam/ CAbledetect/
SUmmary}
Shows the specified verifier parameter's current setting. If no parameter is
specified, it shows the current settings of all parameters in the verifier
category.
CLear PRN VERifier SUmmary
Clears the verifier summary data (number of good and bad verifier labels).
Console Commands 4-15