Wireless Mode - Avery Dennison MonarchNet2 9855 Operating Insructions

Wireless Mode

The wireless mode sets how you communicate with your wireless
network.
In Ad-Hoc mode, you do not need an access point. Ad-Hoc mode is also
called peer-to-peer (point-to-point) communications, so as long as the
devices are in range, they will connect and communicate with each other.
Infrastructure mode requires an access point to communicate.
If communicating in a mixed environment where both Ad-Hoc and
Note:
infrastructure mode are used, make sure the SSIDs are unique in
both modes.
From the Main Menu: Select Setup, Network, Wireless. Then follow
these steps.
Press or
1.
WIRELESS
Wireless Mode
Press Enter/Pause. The current setting is displayed, for example:
2.
WiFi Mode
Ad Hoc
Press or
3.
need, press Enter/Pause.
Press Escape/Clear until you see the Main Menu.
4.
2-10 MonarchNet2 Operating Instructions
until you see
to change the setting. After you display the option you