Avery Dennison MonarchNet2 9855 Operating Insructions page 40

Set the Skip Index mode: No or Yes. Skip index allows you to print
7.
an image over multiple labels.
Set the Backfeed: Off, On, or Extended. Backfeed advances each
8.
printed label to the specified dispense position and then backs up the
next label to be printed underneath the printhead. Do not use
extended backfeed on non-knife printers.
Enter a value for the Dispense Position (range is 50 to 200).
9.
This adjusts the stopping point of the label after it is printed.
10. Enter a value for the Backfeed Distance (range is 10 to 200).
This is the amount to move the label backwards before printing.
11. Enter a value for the Contrast (range is –699 to 699).
This adjusts the darkness of printing on the supply.
12. Enter a value for the Print Position (range is –450 to 450).
This adjusts where data prints vertically on the supply.
13. Enter a value for the Margin Position (range is –99 to 99).
This adjusts where data prints horizontally on the supply.
14. Click Submit when finished.
3-6 MonarchNet2 Operating Instructions