Avery Dennison MonarchNet2 9855 Operating Insructions page 13

Test Button
LED Status
Indicators
Antenna
Press this button down for less than five seconds
to print a configuration label on the printer.
The label shows the current wireless and network
settings of the print server. See "Printing a
Configuration Label" for more information. If the
label does not print, see Chapter 6,
"Troubleshooting."
Press this button down for 10 seconds to reset
the password to "access." To reset the print
server to its factory default parameters, see
"Default Network" for more information.
The orange light comes on when the printer is
turned on. The yellow light comes on solid when
an Ethernet link (wired 10baseT) is established.
The green light comes on solid when an Ethernet
link (wired 100baseTX) is established. Both the
yellow and green lights come on solid when a
wireless link is established. The lights blink
during network activity.
A rugged 802.11b/g compatible antenna, mounted
on the back of plastic-cover printers or on the top
of metal-cover printers.
Getting Started 1-7