Using This Manual; System Requirements - Avery Dennison MonarchNet2 9855 Operating Insructions

U s i n g T h i s M a n u a l
Following is a summary of the contents of this manual:
Chapter
1 Getting Started
2 Configuring the
802.11b/g and
IP Settings
3 Using a Web Browser
4 Console Commands
5 Using the Smart Relay
System
6 Troubleshooting
A Specifications
G Glossary
S y s t e m R e q u i r e m e n t s
To use the print server for printing from a wireless network, you need an
802.11b/g wireless network. The wireless network consists of either of
the following:
♦ An 802.11b/g wireless enabled computer printing straight to the
printer
(Ad-Hoc mode).
♦ An 802.11b/g wireless access point allowing wireless and wired
Ethernet enabled computers to print to the print server (infrastructure
mode).
To configure and print, you need the following:
The MAC address from the label of the print server (for example:
1.
004017023F96).
Obtain the following information from your wireless network
2.
administrator:
1-2 MonarchNet2 Operating Instructions
Contents
Information you should know before using the
printer.
Setting communications between your network and
printer.
Using your Web browser to configure and monitor
your network printer.
Lists the supported console commands for your
network printer.
Explains how to configure a primary and partner
printer.
Common problems and their solutions.
Printer and radio specifications.
Networking and printer terms and their definitions.