Getting Started; Overview; Audience - Avery Dennison MonarchNet2 9855 Operating Insructions

G E T T I N G S T A R T E D
1
Your Monarch® 9855® or 9860™ Version 5.0 or greater printer
contains MonarchNet2™ software, which allows you to access, configure,
and control your printers with the Monarch® 7411™ Ethernet Print Server
remotely across a LAN (local area network), WLAN (wireless local area
network), or WWW (world-wide web) connection.
Information in this document supercedes information in previous
versions. Check our Web site (www.monarch.com) for the latest release
and documentation information.
O v e r v i e w
The Monarch® 7411™ Print Server lets you communicate with Monarch®
printers on an 802.11b and 802.11g wireless network or wired Ethernet
802.3 network. 802.11b/g refers to 802.11b and 802.11g in this manual.
You can use the print server in Ad-Hoc (peer-to-peer) or infrastructure
(access point) wireless mode. The print server operates at speeds of up
to 54 Mbps on any IEEE 802.11b/g wireless compatible network.
The wireless print server includes a dual-mode built-in wired Ethernet
(802.3) connection so the print server automatically switches between
wireless and wired Ethernet mode within the same subnet address. When
switching between wired and wireless mode on different subnets, turn off
the printer and then turn it back on to reinitialize the print server.
Refer to your network manuals for more information. This manual does
not include information about setting up your wireless or wired network.
We recommend reviewing the terms in the glossary before you
begin.
A u d i e n c e
This manual is written for the System Administrator who sets up printers
on the network and is familiar with basic networking principles.

Getting Started 1-1