Click Submit. The MPCL format is sent or results from a Telnet
3.
console command appear.
C h a n g i n g t h e P a s s w o r d
You can change the access password for MonarchNet2. This should only
be done by your System Administrator. The default is access.
The password is case-sensitive and saved in the printer's flash
memory.
Make a note of the password if you change it. Changing the
Note:
password also restricts access to Telnet sessions.
From the side Menu Bar, click Access Control.
1.
Enter the Current Password.
2.
Enter the New Password.
3.
3-22 MonarchNet2 Operating Instructions