Setup Commands - Avery Dennison MonarchNet2 9855 Operating Insructions

UNPROTect
Allows the user to enter the update password (if one has been defined).
Once the update password is entered correctly, SET commands can be used to
modify the configuration until the console session is closed with EXIT.
UPTIME
Shows how long the printer has been on in format hh:mm:ss up N day(s),
hh:mm:ss.
ZEro
Zeros statistical counts.
S e t u p C o m m a n d s
SET PRN BACkfeedcontrol [ACtion/ DISPenseposition/
DISTance] value
Sets the specified backfeedcontrol parameter to the specified value.
SHow PRN BACkfeedcontrol {ACtion/ DISPenseposition/
DISTance}
Shows the specified backfeedcontrol parameter's current setting. If no
parameter is specified, it shows the current settings of all parameters in the
backfeedcontrol category.
SET PRN BATchoptions [CLearfields/ NUmberofparts/
CUTOption/ CUTMultiple/ PRintmultiple/ QUantity] PRompt
[YEs/ NO]
Turns on or off the specified batch entry prompt. These parameters also have
corresponding values, such as "cut last ticket" for CUTOption.
SET PRN BATchoptions [CLearfields/ NUmberofparts/
CUTOption/ CUTMultiple/ PRintmultiple/ QUantity] value
Sets the specified batchoptions parameter to the specified value.
SET PRN BATchoptions [CUTLTicketprompt/
CUTAfterbatchprompt/ NOCutbeforeprompt/ CUTLStripprompt]
[YEs/ NO]
Sets the specified batchoptions parameter's current setting. If no parameter is
specified, it shows the current setting of all parameters in the batchoptions
category.
Console Commands 4-11