Avery Dennison MonarchNet2 9855 Operating Insructions page 45

Enter the Domain Name.
8.
Enter the Primary DNS Server's IP address.
9.
10. Enter the Secondary DNS Server's IP address.
11. Select Enable Network Time to enable the network time protocol,
which allows the printer to query a time server on the network and
synchronize the clock in the printer.
12. Enter the Time Server's IP address. The printer waits 20 seconds
for the server to respond. The status is displayed within
parentheses: "Waiting for Server," "Time Server Error," or the current
date and time.
13. Enter the Time Zone Adjustment in hours and minutes, from
Greenwich Mean Time (GMT). This offset varies by location and time
zone. For example, Eastern/Standard time is five hours behind GMT.
Use –5:00 for the offset. For an offset of 3.5 hours, use 3:30.
Changes for Daylight Savings Time are not made automatically.
Note:
If your time zone participates in Daylight Savings Time, change
the time zone offset accordingly.
14. Set the TCP Window. 10240 is the default.
15. Set the TCP Port. Port 9100 is the default.
16. Set the TCP Timeout (in minutes). The default is 0, which is no
timeout.
17. Set the Keepalive Timer (in minutes). The default is 1 minute.
18. Enable or Disable IP Receive CheckSum and Probe Idle
Connections.
19. Select Retry Enable for LPD/LPR.
Using a Web Browser 3-11