Avery Dennison MonarchNet2 9855 Operating Insructions page 25

SSID
The Service Set Identifier (SSID) is a unique identifier that must match
for all nodes on a subnetwork to communicate with each other.
It consists of up to 32 characters (any printable character, including
spaces). If using the space character, it must be enclosed in quotation
marks.
The SSID is case-sensitive.
Note:
To change the setting, from the Main Menu: Select Setup, Network,
Wireless. Then follow these steps.
Press or
1.
WIRELESS
SSID
Press Enter/Pause. The current setting is displayed, for example:
2.
SSID
ABC1234
Press or
3.
quickly through the characters from 0-9;A-Z;a-z or press Feed/Cut
once to scroll one character at a time. After you display the
character you need, press Enter/Pause. You must press
Enter/Pause after each character to save the change and continue.
To clear the SSID, press
at the end of the SSID field. If you are in the middle of the field
and you press
right of the cursor are cleared.
If using the Monarch® 9860 printer with the attached Monarch®
Note:
939 keyboard, you may simply enter the SSID you need using
the numeric keys and press
Press Escape/Clear until you see the Main Menu.
4.
until you see
to move through the positions. Hold Feed/Cut to scroll
and
and at the same time, any characters to the
at the same time when you are
.
Configuring the 802.11b/g and IP Settings 2-9