Osd - Function Setup > Preset Setup - Digital Watchdog x12 WDR PTZ User Manual

OSD -
FUNCTION SETUP > PRESET SETUP
What is a Preset?
A Preset is a unique command users can assign the camera.
The PTZ39X supports up to 255 di erent Presets.
Users can use 127 Presets to setup di erent positions for the camera
Users can setup 1~128 Presets for di erent camera positions, except for preset 95.
Preset 95 is reserved for starting the camera's OSD menu.
For a complete list of all the reserved presets, see below.
See Appendix II for more information on reserved presets.
1
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<PRESET SETUP>
<SCAN SETUP>
<PATTERN SETUP>
<GROUP SETUP>
<SCHEDULE SETUP>
BACK
EXIT
Press Near/Enter Key
2
PRESET SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET NO. 1
UNDEFINED
<EDIT SCENE>
BACK
EXIT
Select <EDIT SCENE>,
Press Near/Enter Key
3
EDIT SCENE -PRESET1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO TARGET POSITION
[NEAR:SELECT/FAR:CANCEL]
Press Near/Enter Key
4
PRESET SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET NO. 1
<EDIT SCENE>
<LABEL>
CLR PRESET CANCEL
CAM ADJUST GENERAL
ALARM OUT -
BACK
EXIT
1
2
3
4
0/0/x1/E
26
FUNCTION SETUP
Configure 5 special functions with this menu.
PRESET SETUP - Undefined
PRESET NO.
If a selected preset is already defined, camera moves to pre-defined
position and preset characteristics such as label and relay outputs
show on monitor. (Refer screen 4) If a selected preset is not defined,
'UNDEFINED' shows on monitor.
<EDIT SCENE>
Redefine the current preset scene position(i.e. PTZ).
EDIT SCENE
1. Using joystick, move camera to the desired position.
2. By pressing near key, save the current PTZ data.
3. Press far key to cancel.
PRESET SETUP
If the preset is defined, the information will be shown on the
OSD menu with the setting, and the alarm device (if defined)
will be activated.
PRESET NO.
<EDIT SCENE>
<LABEL>
Edits Label to show on monitor when preset runs. Max. 10 alphabets
are allowed.
CAM ADJUST
- WB(White Balance) and AE(Auto Exposure) can be set up independently
for each preset.
- GENERAL: WB or AE can be set up totally and simultaneously for all
presets in 'ROOT MENU>CAMERA SETUP' menu.
- SPECIAL: WB or AE can be set up independently or separately for each
preset in each preset setup menu.
- Each special WB/AE value should the activated correspondingly when
camera arrives at each preset location. During jog operation, general
WB/AE value should be applied.
- All special WB/AE value should not be changed although general
WB/AE value is changed. If 'SPECIAL' is selected, the menu to set WB/AE
is shown on monitor.
ALARM OUT
Relay output can be linked with preset run. ' - 'means off, '1' means on.