Related Manuals for Digital Watchdog PTZ39X
Summary of Contents for Digital Watchdog PTZ39X
- Page 1 Super Speed Dome PTZ39X PTZ Outdoor Dome Camera User’s Manual Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference. Version 1.00...
-
Page 2: Safety Information
Safety Information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage This exclamation point symbol is intended to alert the consisting a risk of electric shock is present within user to the presence of important operating and... - Page 3 Safety Information CAUTION 1. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibration or magnetic interference. 2. Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high humidity.
-
Page 4: Safety Instructions
Safety Instructions WARNING Read these instructions. Keep these instructions. Regard all warnings. Follow all instructions. Do not use this camera near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatuses that produce heat. -
Page 5: Table Of Contents
OSD - CAMERA SETUP > WB SETUP OSD - CAMERA SETUP > AE SETUP OSD - CAMERA SETUP > SPECIAL OSD - INTELLIGENCE > MASK AREA OSD - INTELLIGENCE > ALARM OUT OSD - SYSTEM SETUP OSD - SYSTEM INITIALIZE SPECIFICATIONS Dimension Specification PTZ39X... - Page 6 Features CAMERA SPECIFICATIONS PTZ (PAN/TILT/ZOOM) CONTROL • CCD Sensor: EX-View HAD • With RS485 communication, a maximum of 255 • Zoom Magnification: ×39 Optical, ×12 Digital Zoom cameras can be controlled at the same time. • Wide Dynamic Range • Auto, Pelco-D, Pelco-P, Samsung, Panasonic, Kalatel, •...
-
Page 7: Product & Accessories
Product & Accessories Product Accessories Housing Safety Waterproof Tape Cable Hanger Hexagonal Wrench Anchor Bolt (4pcs) Wall Mount U s e r ’s M a 1 0 2 n u a l Hole Template User’s Manual Safety Wire Pendant Mount... -
Page 8: Part Name
Part Name Wall or Pendant Mount Bracket The Wall or Pendant Mount Bracket is used to install the camera onto the wall or ceiling. It includes a built-in junction box. Housing Safety Th junction box accommodates the inner box. Cable Hanger Wall Mount Bracket Inner Box Pendant Mount Bracket... -
Page 9: Dip Switch Setup
DIP Switch Setup Before installing the camera, PANASONIC you should first set the DIP Switch to configure the Camera ID (Communication Protocol). Inner Box GE(Kalatel) AD (American Dynamics) Protocol Setup Baud Rate Setup RS-485 Termination Resistor - If you set the protocol as AUTO, camera will automatically recognize the type of protocol being used;... - Page 10 DIP Switch Setup 2. Communication Baud Rate Setup 4. Camera ID Setup Select the appropriate Baud Rate using the Inner Box following DIP switch combination. 2400 BPS 4800 BPS The ID number of camera is set using binary number. The examples are shown below. 9600 BPS - Factory Default ID Value ex) ID=5...
-
Page 11: Installation
Installation You have to detach the PTZ mechanism from the upper housing to plug the cable connector. To detach PTZ mechanism, press down and hold against both sides of the black handles on the PTZ mechanism. [1] Wind the waterproof tape around the pipe of the upper housing. - Page 12 Installation Plug the main cable into the main connector that is located on the upper housing and press the main cable until it sounds snap to lock. Plug safety wire into the connectors located on the upper housing. Plug the cable connector from the junction box properly.
- Page 13 Installation Close the dome cover carefully. Match the “Arrow Mark” to nd the right location. Arrow Mark Arrow Mark Tighten the four screws on the dome cover in the same sequence shown in the picture. To maintain the best sealing, the torque of each screw must be in the range between 0.5 ~ 1.0 N·m (0.3 ~ 0.73 lbf·ft).
-
Page 14: Cabling
Cabling Inner Box RS-485 BNC Video (Keyboard Controller/DVR) Power Video RS-485 Communication (DVR/Keyboard) Power Connection For PTZ control, connect this line to keyboard and Please check the voltage and the current capacity of DVR. To control multiple cameras at the same time, rated power carefully. -
Page 15: Alarm Output
Cabling Inner Box Alarm Output Alarm Input Alarm Output In 1 In 8 Alarm Input/Sensor Alarm Output Sensor Input The 4 alarm outputs are the relay contact type. To use alarm input, select the type of sensor to Therefore, you do not have to worry about the you wish to use. -
Page 16: Check Points Before Operation
Check Points Before Operation 1. Before power is applied, please check the cables carefully. 2. The camera ID of the controller must be identical to that of the camera you wish to control. You can check the camera ID in the system information of the OSD menu. 3. -
Page 17: Osd Menu
Functions Preset Group Maximum 127 positions can be stored as preset The group function allows you to run a sequence of positions. The numbers 1 to 128 can be assigned as presets, pattern, and/or scans. preset numbers, but 95 is reserved for starting the See section ROOT MENU >... -
Page 18: Osd Display Of Main Screen
OSD Display of Main Screen PRESET LABEL PATTERN 1 Preset Label Action Title CAMERA ID_TOP Camera ID_Top CAMERA ID_TOP CAMERA ID_BOT Alarm I/O Information Camera ID_Bottom CAMERA ID_BOT Compass Direction O 1234 23/MAR/2009 Date / Time I 12345678 24 00 00 Zoom Magnification 359/180/x100/SE CAM 1... -
Page 19: General Rules Of Key Operation For Menu
General Rules of Key Operation for Menu The characters < > that surround the menu item ROOT MENU indicate that there is a sub menu. - - - - - - - - - - - - - - - - - - - - - - - - - - - <SYSTEM INFORMATION>... - Page 20 OSD - ROOT MENU & SYSTEM INFORMATION ROOT MENU ROOT MENU - - - - - - - - - - - - - - - - - - - - - - - - - - - <SYSTEM INFORAMTION> <SYSTEM INFORMATION>...
-
Page 21: Osd - Display Setup > Camera Id
OSD - DISPLAY SETUP > CAMERA ID DISPLAY SETUP DISPLAY SETUP This menu defines what is displayed on the OSD of the - - - - - - - - - - - - - - - - - - - - - - - - - - - ADDRESS main screen. -
Page 22: Osd - Display Setup > Privacy Zone
OSD - DISPLAY SETUP > PRIVACY ZONE DISPLAY SETUP DISPLAY SETUP See the previous page. - - - - - - - - - - - - - - - - - - - - - - - - - - - ADDRESS CAMERA ID EDIT MASK - Move to Target Position... - Page 23 OSD - DISPLAY SETUP > PRIVACY ZONE PRIVACY ZONE - STYLE > COLOR PRIVACY ZONE Sets the color of the mask. - - - - - - - - - - - - - - - - - - - - - - - - - - - MASK NO.
-
Page 24: Osd - Motion Setup
OSD - MOTION SETUP MOTION SETUP MOTION SETUP Configures the general functions of pan/tilt motions. - - - - - - - - - - - - - - - - - - - - - - - - - - - PRESET LOCK PWR UP ACTION PRESET LOCK... -
Page 25: Motion Setup
OSD - MOTION SETUP ALARM INPUT SETUP MOTION SETUP If an external sensor is activated, camera will move to - - - - - - - - - - - - - - - - - - - - - - - - - - - PRESET LOCK the corresponding action. -
Page 26: Osd - Function Setup > Preset Setup
OSD - FUNCTION SETUP > PRESET SETUP FUNCTION SETUP FUNCTION SETUP Configure 5 special functions with this menu. - - - - - - - - - - - - - - - - - - - - - - - - - - - <PRESET SETUP>... - Page 27 OSD - FUNCTION SETUP > PRESET SETUP LABEL PRESET SETUP Edits the label to show on monitor when camera arrives at - - - - - - - - - - - - - - - - - - - - - - - - - - - PRESET NO.
-
Page 28: Osd - Function Setup > Scan Setup
OSD - FUNCTION SETUP > SCAN SETUP SCAN SETUP FUNCTION SETUP By using the scan function, you can make the camera to move - - - - - - - - - - - - - - - - - - - - - - - - - - - <PRESET SETUP>... -
Page 29: Osd - Function Setup > Pattern Setup
OSD - FUNCTION SETUP > PATTERN SETUP PATTERN SETUP FUNCTION SETUP Pattern function is when a camera memorizes the path (mostly - - - - - - - - - - - - - - - - - - - - - - - - - - - <PRESET SETUP>... -
Page 30: Osd - Function Setup > Group Setup
OSD - FUNCTION SETUP > GROUP SETUP GROUP SETUP FUNCTION SETUP The group function allows you to run sequence of presets, pattern, - - - - - - - - - - - - - - - - - - - - - - - - - - - <PRESET SETUP>... - Page 31 OSD - FUNCTION SETUP > GROUP SETUP EDIT GROUP - Selects Function Sequence EDIT GROUP When you finish setting up an ACTION, press Near or Enter key. - - - - - - - - - - - - - - - - - - - - - - - - - - - NO.
-
Page 32: Osd - Function Setup > Schedule Setup
OSD - FUNCTION SETUP > SCHEDULE SETUP SCHEDULE SETUP SCREEN FUNCTION SETUP The schedule function allows running an appropriate function - - - - - - - - - - - - - - - - - - - - - - - - - - - <PRESET SETUP>... - Page 33 OSD - FUNCTION SETUP > SCHEDULE SETUP SCHEDULE SETUP The second rule means camera will move to preset 12 at 7:00 - - - - - - - - - - - - - - - - - - - - - - - - - - - MASTER ENABLE every Wednesday.
-
Page 34: Osd - Camera Setup > Wb Setup
OSD - CAMERA SETUP > WB SETUP ZOOM CAMERA SETUP ZOOM CAMERA SETUP - - - - - - - - - - - - - - - - - - - - - - - - - - - FOCUS MODE SEMIAUTO DIS MODE... -
Page 35: Osd - Camera Setup > Ae Setup
OSD - CAMERA SETUP > AE SETUP AE SETUP AE SETUP - - - - - - - - - - - - - - - - - - - - - - - - - - - IRIS ALC / MANUAL IRIS <ALC>... - Page 36 OSD - CAMERA SETUP > AE SETUP DAY/NIGHT AE SETUP The camera automatically detects the change by the - - - - - - - - - - - - - - - - - - - - - - - - - - - IRIS <ALC>...
-
Page 37: Osd - Camera Setup > Special
OSD - CAMERA SETUP > SPECIAL ZOOM CAMERA SETUP ZOOM CAMERA SETUP - - - - - - - - - - - - - - - - - - - - - - - - - - - FOCUS MODE SEMIAUTO DIGITAL ZOOM IMAGE FLIP... -
Page 38: Osd - Intelligence > Mask Area
OSD - INTELLIGENCE > MASK AREA INTELLIGENCE INTELLIGENCE - - - - - - - - - - - - - - - - - - - - - - - - - - - MOTION ADVANCED MOTION OFF / DETECTION / TRACKING 1 2 3 4 MASK AREA Enable motion detection and tracking functions. -
Page 39: Osd - Intelligence > Alarm Out
OSD - INTELLIGENCE > ALARM OUT ALARM OUT INTELLIGENCE When ALARM OUT is set to ON, the camera will produce - - - - - - - - - - - - - - - - - - - - - - - - - - - MOTION alarm signals when motion is detected or when the ADVANCED... - Page 40 OSD - SYTEM SETUP SYSTEM SETUP SYSTEM SETUP - - - - - - - - - - - - - - - - - - - - - - - - - - - <DATE/TIME SETUP> <DATE/TIME SETUP> <RELAY TYPE> Opens DATE/TIME SETUP menu.
- Page 41 OSD - SYTEM SETUP SET HOME POSITION SET HOME POSOTION Home position means the origin of pan angle calculation. - - - - - - - - - - - - - - - - - - - - - - - - - - - The value of pan angle displayed on the screen is based on this home position.
-
Page 42: Osd - System Initialize
OSD - SYSTEM INITIALIZE Initial Configuration Table SYSTEM INITIALIZE Address - - - - - - - - - - - - - - - - - - - - - - - - - - - CLEAR ALL DATA Camera ID CLR DISPLAY SET CLR CAMERA SET... -
Page 43: Speci Cations
Speci cations - Dimension unit: mm 101.5... -
Page 44: Specification Ptz39X
Speci cations - Speci cation PTZ39X Signal Format NTSC Image Device 1/4” EX View-HAD PS CCD Total Pixel 410K Pitxels, 811 (H) x 508 (V) 470K Pixels, 795 (H) x 596 (V) E ective Pixel 380K Pixels, 768 (H) x 494 (V) 440K Pixels, 752 (H) x 582 (V) H. -
Page 45: Warranty Information
WARRANTY INFORMATION Digital Watchdog (referred to as “the Warrantor”) warrants the Digital Watchdog Camera against defects in materials or workmanship as follows: LABOR : For the initial two (2) years from the original purchase date, if the camera is determined to be defective, the Warrantor will repair or replace the unit with a new or refurbished product at its option at no charge. - Page 46 LIMITS AND EXCLUSIONS There are no express warranties except as listed above. The Warrantor will not be liable for incidental or consequential damages (including, without limitation or damage to recording media) resulting from the use of these products, or arising out of any breach of the warranty. All express and implied warranties, including the warranties of merchantability and tness for particular purpose, are limited to the applicable warranty period set forth above.
- Page 47 5436 W Crenshaw St. Tampa, FL 33634 Toll Free : 866-446-3595 Tel : 813-888-9555 Fax : 813-888-9262 www.Digital-Watchdog.com technicalsupport@dwcc.tv Technical Support Hours : Monday-Friday 8:30AM to 8:00PM Eastern Standard Time Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.