Osd - Function Setup > Pattern Setup - Digital Watchdog x12 WDR PTZ User Manual

OSD -
FUNCTION SETUP > PATTERN SETUP
1
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<PRESET SETUP>
<SCAN SETUP>
<PATTERN SETUP>
<GROUP SETUP>
<SCHEDULE SETUP>
BACK
EXIT
Press Near/Enter Key
2
PATTERN SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PATTERN NO.
UNDEFINED
CLEAR PATTERN CANCEL
<EDIT PATTERN>
BACK
EXIT
Select <EDIT PATTERN>,
Press Near/Enter Key
3
EDIT PATTERN
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO START POSITION
[NEAR:START/ FAR:CANCEL]
Move Camera to Area,
Press Near/Enter Key
4
EDIT PATTERN
[NEAR:SAVE / FAR:DELETE]
Record the Path of the Pattern
by Camera Control
5
EDIT PATTERN
[NEAR:SAVE / FAR:DELETE]
1
1
0/0/x1/E
1
0/0/x1/E
1
Note: to properly setup a pattern for the camera,
be sure to have at least 2 Presets, and 1 Scan setup.
0/0/x1/E
29
2 PATTERN SETUP
Pattern function is that a camera memorizes the path (mostly
curve path) by joystick of controller for assigned time and
revives the path exactly as it memorized.
4 patterns are available and max. 1000 communication
commands can be stored in a pattern.
PATTERN NO.
Select pattern number to edit. If a selected pattern number is not defined,
'UNDEFINED' will be displayed under selected pattern number.
CLR PATTERN
Deletes data in the current pattern.
<EDIT PATTERN>
Starts editing pattern.
3
EDIT PATTERN - Select the Position
1. By using joystick, move to the start position with appropriate
zoom.
2. To start the pattern recording, press near or enter key.
3. To exit this menu, press far key.
EDIT PATTERN - Records
4
1. Move the camera with joystick of the controller or run preset
function to memorize the path (mostly curve path) in a
selected pattern.
2. The total memory size and the rest memory size is displayed
in the form of bar.
3. To save data and exit, press near key.
4. To cancel recording and delete the recorded data, press far
key.