Digital Watchdog x12 WDR PTZ User Manual page 31

OSD -
FUNCTION SETUP > GROUP SETUP
6
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 PATTERN 1 00:03 1
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE [ :MOVE CURSOR]
CANCEL [ : CHANGE VAL.]
Press Near/Enter Key
7
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 PATTERN 1 00:03 1
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE [NEAR:EDIT ACT]
CANCEL [FAR :EDIT END]
Press Far Key
8
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 PATTERN 1 00:03 1
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
Note: to properly setup a group for the camera, be sure to have at least 2 Presets,
1 Scan, and 1 Patter setup.
EDIT GROUP - Selects Function Sequence
7
After finishing setting up an 'ACTION', press near or enter key
1
to one-upper-level menu. Move cursor up/down to select
'ACTION NO.' and repeat to step 4 ~ step 6 to edit the selected
group.
EDIT GROUP - Saves the Setting
8
After finishing setting up all actions, press far key to exit.
Then cursor should be moved to 'SAVE'. Press near or enter
key to save the data.
1
1
31
4 6