Table of Contents
Advertisement
OSD -
CAMERA SETUP > SPECIAL (HLC/ DNR)
1
ZOOM CAMERA SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
FOCUS MODE
SEMIAUTO
DIGITAL ZOOM
ON
OFF
IMAGE FLIP
FLICKERLESS
OFF
<WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
<SPECIAL>
BACK
EXIT
Press Near/Enter Key
2
SPECIAL
- - - - - - - - - - - - - - - - - - - - - - - - - - -
DNR
OFF
DETAIL
5
HR
OFF
HLC
OFF
BACK
EXIT
This setup is not supported on some models.
2
SPECIAL
Sets the special function relaced to the image.
DNR
If reduces the noise caused by 'AGC' action. If set to AUTO or MANUAL,
the noise will be reduced but the ghost effect on moving objects will
be increased. If enabled, select the apropriate level from 1~10.
DETAIL
Selects if the sub screen will be displayed. Sub screen will be displayed
on the bottom of the right side. Even though the main image enables
the digital zoom, the sub screen will only display with maximum optical
zoom.
HR(High Resolution)
This mode enhances edges and produces higher definition images.
HLC
Part where becomes brightness more than the standard value is
automatically hid by mask on the video.
36
Advertisement
Table of Contents
