Osd - System Setup - Digital Watchdog x12 WDR PTZ User Manual

OSD -
SYSTEM SETUP
1
SYSTEM SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<DATE/TIME SETUP>
<RELAY TYPE>
<PASSWORD>
<SET HOME POSITION>
<SET NORTH DIRECTION>
LANGUAGE ENGLISH
<FAN HEATER SETUP>
<PROTOCOL/BAUDRATE>
BACK
EXIT
2
DATE/TIME SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
DATE 0 1 /JAN/2008(TUE)
TIME 00:00:0 1 (H/M/S)
BACK
EXIT
3
RELAY TYPE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
RELAY 1 NORMAL OPEN
BACK
EXIT
4
EDIT PASSWORD
- - - - - - - - - - - - - - - - - - - - - - - - - - -
[ ]
- - - - - - - - - -
1 2 3 4 5 6 7 8 9 0
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z a b c d
e f g h i j k l m n
o p q r s t u v w x
y z < > - / : .
SET HOME POSITION
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO TARGET POSITION
[NEAR:SELECT/FAR:CANCEL]
OK
CANCEL
DISABLE
0/0/x1/E
1 SYSTEM SETUP
<DATE/TIME SETUP>
Start 'DATE/TIME SETUP' setup.
'<DATE/TIME SETUP>' is displayed only analog camera.
<RELAY TYPE>
Start 'RELAY TYPE' setup.
<PASSWORD>
Start 'PASSWORD' setup.
<SET HOME POSITION>
Starts 'SET HOME POSITION' setup. See the screen 4 below.
<SET NORTH DIRECTION>
Starts 'SET NORTH DIRECTION' setup.
LANGUAGE
You can select a preferred Language of OSD display. After selecting
a language, press near or enter key.
<FAN HEATER SETUP>
Moves to 'FAN HEATER SETUP' screen.
This setup is only applicable for fan/heater model.
<PROTOCOL/BAUDRATE>
Moves to 'PROTOCAL/BAUDRATE' screen.
DATE/TIME SETUP
2
This setup is not supported on some models.
DATE
Date is displayed in dd/mm/yy format.
1. If you press the near key, the focus will be placed on 'dd'.
2. Sets date moving joystick Up/Down.
3. Moves joystick Left/Right to move to date-month-year.
4. The values in the field are changed using Up/Down keys.
The day is automatically calculated when you set the day.
TIME
Time is displayed in HH:MM:SS format.
Sets time same as setting date.
RELAY TYPE SETUP
3
RELAY1
Contacts type of of 1ch. Relay out are defined.
4 EDIT PASSWORD
Sets the 4 characters long password. If this function is set to
'ENABLE', the password is required whenever you enter OSD
menu.
The default password is '4321' and the master password is '- - > g'.
37