Function Setup > Preset Setup - Digital Watchdog PTZ39XFM User Manual

3
OSD -
FUNCTION SETUP > PRESET SETUP
1
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<PRESET SETUP>
<SCAN SETUP>
<PATTERN SETUP>
<GROUP SETUP>
<SCHEDULE SETUP>
BACK
EXIT
2
PRESET SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET NO.
UNDEFINED
<EDIT SCENE>
BACK
EXIT
3
EDIT SCENE
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO TARGET POSITION
[NEAR:SELECT/FAR:CANCEL]
4
PRESET SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET NO.
<EDIT SCENE>
<LABEL>
CLR PRESET CANCEL
CAM ADJUST GENERAL
ALARM OUT - - - -
BACK
EXIT
Press Near/Enter Key
1
Select <EDIT SCENE>,
Press Near/Enter Key
-PRESET1
0/0/x1/E
Press Near/Enter Key
1
1
FUNCTION SETUP
Configure 5 special functions with this menu.
2
PRESET SETUP - Undefined
127 presets (1~128) can be assigned excluding the number 95,
which is reserved for the OSD menu.
PRESET NO. 1 ~ 128 (Excluding 95)
If a selected preset is already defined, camera moves to pre-defined
position, and preset characteristics such as label and relay outputs
appear on monitor. Refer screen 4. If a selected preset is not defined,
UNDEFINED will appear on the monitor.
<EDIT SCENE>
Redefine the current preset scene position (i.e. PTZ).
3
EDIT SCENE
1. Using joystick, move camera to the desired position.
2. By pressing Near key, save the current PTZ data.
3. Press Far key to cancel.
PRESET configuration should be used only for Optical Zoom. If
Optical Zoom and Digital Zoom are used together and PRESET is set,
it is likely to cause malfunction.
4
PRESET SETUP
If the preset is defined, the information will be shown on the
OSD menu with the setting, and the alarm device will be
activated, if it has been defined.
PRESET NO. 1 ~ 128 (Excluding 95)
<EDIT SCENE>
<LABEL>
Edits Label to show on monitor when preset runs. Maximum ten
characters are allowed.
CAM ADJUST GENERAL / SPECIAL
- WB (White Balance) and AE (Auto Exposure) can be set independently
for each preset.
- GENERAL: WB or AE can be set completely and simultaneously for all
presets in ROOT MENU > CAMERA SETUP menu.
- SPECIAL: WB or AE can be set independently or separately for each
preset in each preset setup menu.
- Each special WB and AE value should the activated correspondingly
when camera arrives at each preset location. During jog operation,
the general WB and AE value should be applied.
- The special WB and AE values should not be changed when the
general WB and AE value is changed. If SPECIAL is selected, the menu to
set the special WB and AE appears on the monitor.
- - - - ~ 1 2 3 4
ALARM OUT
The status of four alarm outputs can be freely controlled in conjunction
with preset run. The character "-" means the alarm output is OFF, and
the number which represents the alarm means ON.
Ex) "- 2 3 - " means output relay 2 and 3 will be ON, and 1 and 4 will be
OFF, when you run this preset.