Table of Contents
Advertisement
OSD -
FUNCTION SETUP > GROUP SETUP
1
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<PRESET SETUP>
<SCAN SETUP>
<PATTERN SETUP>
<GROUP SETUP>
<SCHEDULE SETUP>
BACK
EXIT
Press Near/Enter Key
2
GROUP SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
GROUP NO.
UNDEFINED
CLEAR GROUP
CANCEL
<EDIT GROUP>
BACK
EXIT
Select <EDIT GROUP>,
Press Near/Enter Key
3
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
[NEAR:EDIT]
Press Near/Enter Key
4
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
[NEAR:EDIT ACT]
CANCEL
[FAR :EDIT END]
Press Near/Enter Key
5
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
NONE
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
[
:MOVE CURSOR]
CANCEL
[
: CHANGE VAL.]
1
1
1
1
30
2
GROUP SETUP SCREEN
The group function allows running sequence of presets, pattern
and/or scans. Each group can have max. 20 action entities which
can be preset, pattern or scan.
Preset speed can be set up and the repeat number of pattern
& scan can be set up in group setup. Dwell time between
actions can be set up also.
Dwell Time
Preset
Pattern5
Pattern5
1
1 Times
n Times
Max. 20 Entities
GROUP NO.
Selects group number to edit. If a selected group number is not defined,
'UNDEFINED' will be displayed under the selected group number.
CLEAR GROUP
Deletes data in the current group.
<EDIT GROUP>
Starts editing group.
EDIT GROUP - Initial Screen
3
Press near or enter key in 'NO' list to start group setup.
ACTION NO.
Sets the function and function number.
DWELL TIME
Sets dwell time between function by moving joystick up/down.
OPT
It represents preset speed when preset is selected. It should be the
number of repetition when pattern or scan is selected for 'ACTION'.
4
EDIT GROUP – Select Function Sequence
Note that max. 20 functions are allowed in a group.
Move cursor up/down and press near or enter key to set up.
5 6
EDIT GROUP - Assign Function
Set up 'ACTION, 'DWELL' and 'OPT'. Note that selected item is
displayed in reverse. Move cursor left/right to select items and
move cursor up/down to change each value.
Scan3
Preset
1
120
Advertisement
Table of Contents
