Table of Contents
Advertisement
OSD -
FUNCTION SETUP > PRESET SETUP
1
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<PRESET SETUP>
<SCAN SETUP>
<PATTERN SETUP>
<GROUP SETUP>
<SCHEDULE SETUP>
BACK
EXIT
2
PRESET SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET NO.
<EDIT SCENE>
BACK
EXIT
3
EDIT SCENE
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO TARGET POSITION
[NEAR:SELECT/FAR:CANCEL]
4
PRESET SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET NO.
<EDIT SCENE>
<LABEL>
CLR PRESET
CAM ADJUST
ALARM OUT
BACK
EXIT
Configure 5 special functions with this menu.
127 presets (1 ~ 128) can be assigned excluding the number
95, which is reserved for OSD menu.
PRESET NO.
If a selected preset is already defined, camera moves to pre-defined
position and preset characteristics such as label and relay outputs
Press
appear on monitor. (Refer to screen ) If a selected preset is not
Near/Enter
defined, UNDEFINED will appear on monitor.
Key
<EDIT SCENE>
Redefine the current preset scene position (i.e. PTZ).
1
UNDEFINED
1. Using the joystick, move camera to the desired position.
2. By pressing Near key, save the current PTZ data.
3. Press Far key to cancel.
If the preset is defined, the information will be shown on the
Select <EDIT SCENE>,
OSD menu with the setting, and the alarm device (if defined)
Press Near/Enter Key
will be activated.
PRESET NO.
-PRESET1
<EDIT SCENE>
<LABEL>
Edits Label to show on the monitor when the preset runs.
Maximum 10 characters are allowed.
CAM ADJUST
0/0/x1/E
- WB (White Balance) and AE (Auto Exposure) can be set
- GENERAL: WB or AE can be set completely and simultaneously for all
Press
Near/Enter
Key
- SPECIAL: WB or AE can be set independently or separately for each
- Each special WB/AE value should be activated correspondingly
1
- The special WB/AE value should not be changed when the general
CANCEL
GENERAL
- - - -
ALARM OUT
The status of four alarm outputs can be freely controlled in conjunction
with preset run. The character "-" means the alarm output is OFF, and
the number which represents the alarm means ON.
Ex. " - 2 3 - " means output relay 2 and 3 will be ON, and 1 and 4 will
FUNCTION SETUP
1
2
PRESET SETUP - Undefined
1 ~ 128 (Excluding 95)
EDIT SCENE
3
4
PRESET SETUP
1 ~ 128 (Excluding 95)
GENERAL / SPECIAL
independently for each preset.
presets in ROOT MENU > CAMERA SETUP menu.
preset in each preset setup menu.
when camera arrives at each preset location. During jog operation,
general WB/AE value should be applied.
WB/AE value is changed. If SPECIAL is selected, the menu to set
the special WB/AE appears on the monitor.
- - - - ~ 1 2 3 4
be OFF, when you run this preset.
26
4
Advertisement
Table of Contents
