Osd - Function Setup > Preset Setup - Digital Watchdog x39 User Manual

OSD -
FUNCTION SETUP > PRESET SETUP
1
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<PRESET SETUP>
<SCAN SETUP>
<PATTERN SETUP>
<GROUP SETUP>
<SCHEDULE SETUP>
BACK
EXIT
Press
Near/Enter
Key
2
PRESET SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET NO. 1
UNDEFINED
<EDIT SCENE>
BACK
EXIT
Select <EDIT SCENE>,
Press Near/Enter Key
3
EDIT SCENE -PRESET1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO TARGET POSITION
[NEAR:SELECT/FAR:CANCEL]
Press
Near/Enter
Key
4
PRESET SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET NO. 1
<EDIT SCENE>
<LABEL>
CLR PRESET CANCEL
CAM ADJUST GENERAL
ALARM OUT - - - -
BACK
EXIT
1 FUNCTION SETUP
Configure 5 special functions with this menu.
2 PRESET SETUP - Undefined
127 presets (1 ~ 128) can be assigned excluding the number
95, which is reserved for menu.
PRESET NO.
If a selected preset is already defined, camera moves to pre-defined
position, and preset characteristics such as label and relay outputs
appear on monitor. (Refer to screen ) If a selected preset is not
defined, UNDEFINED will appear on monitor.
<EDIT SCENE>
Redefine the current preset scene position (i.e. PTZ).
EDIT SCENE
3
1. Using thejoystick, move camera to the desired position.
2. By pressing Near key, save the current PTZ data.
3. Press Far key to cancel.
4 PRESET SETUP
If the preset is defined, the information will be shown on the
OSD menu with the setting, and the alarm device (if defined)
will be activated.
PRESET NO.
<EDIT SCENE>
<LABEL>
Edits Label to show on the monitor when the preset runs.
Maximum 10 characters are allowed.
CAM ADJUST
0/0/x1/E
- WB(White Balance) and AE(Auto Exposure) can be set
independently for each preset.
- GENERAL: WB or AE can be set completely and simultaneously for all
presets in "ROOT MENU > CAMERA SETUP" menu.
- SPECIAL: WB or AE can be set independently or separately for each
preset in each preset setup menu.
- Each special WB/AE value should be activated correspondingly
when camera arrives at each preset location. During jog operation,
general WB/AE value should be applied.
- The special WB/AE value should not be changed when the general
WB/AE value is changed. If SPECIAL is selected, the menu to set
the special WB/AE appears on the monitor.
ALARM OUT
The status of four alarm outputs can be freely controlled in conjunction
with preset run. The character "-" means the alarm output is OFF, and
the number representing the alarm means ON.
Ex. " - 2 3 - " means output relay 2 and 3 will be ON, and 1 and 4 will be
be OFF, when you run this preset.
37
1 ~ 128 (Excluding 95)
4
1 ~ 128 (Excluding 95)
GENERAL / SPECIAL
- - - - ~ 1 2 3 4