Osd - Display Setup - Digital Watchdog x12 WDR PTZ User Manual

OSD -
DISPLAY SETUP (Privacy Zone)
1
DISPLAY SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
CAMERA ID
PTZ INFORMATION
ACTION TITLE
PRESET LABEL
ALARM I/O
DATE/TIME
<PRIVACY ZONE>
TEMPERATURE CELSIUS
BACK
EXIT
Press Near/Enter Key
2
2
PRIVACY ZONE
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MASK NO. 1
UNDEFINED
DISPLAY OFF
CLEAR CANCEL
<EDIT MASK>
BACK
EXIT
Select <EDIT MASK>,
Press Near/Enter Key
3
3
EDIT MASK
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO TARGET POSITION
[NEAR:SELECT/FAR:CANCEL]
Move Camera to Area to Mask,
Press Near/Enter Key
4
4
EDIT MASK
- - - - - - - - - - - - - - - - - - - - - - - - - - -
[ZOOM : COLOR CHANGE]
[ ADJUST MASK WIDTH]
[ ADJUST MASK HEIGHT]
[NEAR:SELECT/FAR:CANCEL]
Press Near Key to Save
5
5
PRIVACY ZONE
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MASK NO. 1
DISPLAY ON
CLEAR CANCEL
<EDIT MASK>
BACK
EXIT
1
ON
AUTO
AUTO
AUTO
AUTO
2
2
ON
3
3
1
4
0/0/x1/E
1
23
1
DISPLAY SETUP
This menu defines enable/disable of OSD display on main screen.
If an item is set to be 'AUTO', the item is displayed only when the
value of it is changed.
PRIVACY ZONE
Selects area in image to mask.
MASK NO.
Select mask number. If the selected mask has data already, camera moves
as it was set. Otherwise, 'UNDEFINED' will be displayed under 'MASK NO.'.
DISPLAY
Sets if the camera makes mask shows or not on images.
CLEAR
Deletes data in the selected mask no.
<EDIT MASK>
Moves to setup the mask no.
EDIT MASK - Move to Target Position
Move camera to area to mask. Then the menu to adjust mask
size will be displayed.
If the tilt angle is located in the range between 90° to 90°, you can not
set up privacy zone mask.
If tilt angle over 90° (image flipped region) is designated, camera will
automatically move to identical position by changing tilt angle less than
90° and moving pan angle 180° relatively.
EDIT MASK - Color Change & Adjust Mask Size
Adjust mask size. Use joystick or arrow buttons to adjust mask
size.
- Zoom In/Out: Change Color of Mask.
- Move Joystick Left/Right(
- Move Joystick Up/Down(
To hide a certain zone completely regardless of high speed pan/tilt
motions, it is recommended that the size of mask must be 20%
bigger than original target size.
It is noted that during pan/tilt control like jog action, the object behind
the privacy mask can be disclosed in a short period of time.
): Adjust Mask Width.
): Adjust Mask Height.