Setting The System Language; Displaying Voice Settings - Becker CASCADE PRO Operation Manual

Setting the system language

You can select the language for
announcements and displays here.
Notes:
• The memory card containing the nav-
igation data or system CD must be
inserted in order to change the lan-
guage or speaker. If necessary, the
Cascade will prompt you to insert the
memory card/system CD.
• It may take up to 10 minutes to install
the language.
• When the system language changes,
voice entries created for stations and
addresses are deleted.
Select Set system language
!
mode settings.
7004
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required language.
7005
The speaker selection list appears.
Turn the rotary control/push button
!
and then press the rotary control/push
button to select the required speaker.
Note:
• If other voices are available on an
inserted CD for the language cur-
rently selected, then these are also
displayed in the list of voices for this
in the voice
language (only affects navigation
announcements).
• To update the voice dialogue, you
may be prompted to insert the system
CD. If you are, insert it.
The language and the selected speaker
are installed.

Displaying voice settings

This function can be used to display the
currently valid voice settings.
Select Show settings in the voice mode
!
settings.
7006
The voice settings are displayed.
• MMI language: indicates the current
setting for the display text language.
• Navi speaker: indicates the current set-
ting for the navigation announcement
speaker.
• SDS: indicates the current setting for
the voice dialogue system speaker.
• ččS: indicates the current language
setting for reading out texts.
Settings
181