Ending Call; Ending All Calls; Activating - Becker CASCADE PRO Operation Manual

Telephone mode
! Turn the rotary control/push button
to select one of the following op-
tions:
Hang up ,
Hang up all ,
Stop
,
Activate
,
Dial ,
Conference ,
Disconnect ,
In-band sig. or
Private .

Ending call

Hang up
Select in the Options menu to
end the active call. The menu item
up always relates to the call, conference
call or conference call party shown in
the centre of the display. For further in-
formation, see "Ending a call" on
page 114, "Ending a conference call" on
page 117 and "Ending call with individ-
ual parties" on page 117.
118

Ending all calls

(internal phone and SIM-Access only)
Note:
The menu item Hang up all
there are a call on hold and an active
call or conference call.
Select Hang up all in the Options menu to
end the active call and any calls on hold
immediately.
Holding
(internal phone and SIM-Access only)
By selecting Stop in the Options menu
you can place an active call or an active
Hang
conference call into a "queue". You can
then make another call or have a conver-
sation in your vehicle without the other
party hearing. See "Holding" on
page 114.

Activating

(internal phone and SIM-Access only)
Select Activate
tivate the call on hold again. See "Hold-
is shown if
ing" on page 114.
Dialling
(internal phone and SIM-Access only)
Note:
The menu item
a another call can be made.
By selecting
you can establish another call, in addi-
tion to an existing call or a conference
call. You can either enter the number or
select one from the address book or via
the fast access function. See "Holding"
on page 114.
in the Options menu to ac-
Dial is only displayed if
Dial
in the Options menu