Changing/Deleting An Access Profile; Settings - Becker CASCADE PRO Operation Manual

Changing/deleting an access profile

You can change or delete an existing ac-
cess profile.
Open the list of access profiles.
!
! Select the access profile to be modi-
fied or deleted.
! Press the rotary control/ push button
until a menu appears.
5244
! Turn the rotary control/push button
to select one of the following op-
tions:
Change profile or
Delete profile .
Confirm your selection by pressing
!
the rotary control/ push button
If you select Change profile you can adapt
the profile entries as described in "Cre-
ating access profile" on page 148.
Select the Delete profile
profile.
5245
! When the prompt appears, select
to delete the access profile or
cancel the procedure.
If you select Yes , the access profile will
be deleted.
.
Internet (WAP) function
entry to delete the

Settings

In the Settings you can specify the URL
beginning and the URL ending that is to
be suggested by Cascade.
Open the WAP main menu.
!
Yes
No to
5246
! Select the
5247
The Settings menu appears.
Turn the rotary control/push button
!
to select one of the following op-
tions:
URL start
URL end
! Confirm your selection by pressing
the rotary control/ push button
Setting entry.
or
.
.
151