Blocking A Route; Modifying Route Options - Becker CASCADE PRO Operation Manual

Navigation mode

Blocking a route

Using this function, you can block the
section of the route ahead. If possible,
the Cascade will then calculate a diver-
sion route. This may be useful if a traffic
jam or road block lies immediately
ahead.
! In the Options menu, select the
entry.
2073
! Turn the rotary control/push button
to select the required distance to be
blocked.
Confirm your selection by pressing
!
the rotary control/push button
The route is recalculated.
54
Unblocking a route
Once a block has been entered, it can be
removed again.
In the Options menu, select the
!
entry.
Block
2074
Select Yes (delete block) or
!
block).
Note:
If no operator inputs are made, the
menu will automatically disappear after
a few seconds and the block will be
retained.
.

Modifying route options

You can modify the route options during
navigation.
Block In the Options menu, select the
!
opt.
entry.
2075
No (retain Select Dynamic route, Quick route
!
route
or the avoid functions (on =
Note:
Only one of the three settings (
route, Quick route
active ( ) at the same time.
For more information about route
options, see "Setting the route options"
on page 34.
! In the Route Options menu, select
Ready .
The route is calculated with the new
route options.
Route
, Short
).
Dynamic
, Short route ) may be