Entering A Destination Town - Becker CASCADE PRO Operation Manual

Entering a destination town

! In the Enter Destination menu, select
the town ( GLASGOW in the example).
Note:
If your destination is in the same town
as that displayed, you can continue
directly with entering the road/centre.
2004
Confirm your selection by pressing
!
the rotary control/push button
2006
The data entry menu for the town
appears.
! Turn the rotary control/push button
and then press the rotary control/
push button to select each letter one
after the other.
Note:
Select the symbol to delete the last
character in the entry.
2007
The last letter entered is highlighted. To
help, the name of the location closest to
the previous entry appears. The Cascade
offers only the possible remaining letters
for selection. If no other entries are
available, the Cascade completes the
.
town name automatically.
Accept entry:
In the data entry menu, select the
!
symbol.
or
! Press the rotary control/push button
and hold it down for at least 2 seconds.
Navigation mode
If the complete town name has already
been entered or completed automatically,
the unit will either switch automatically
to either the town distinguishing list or
you can continue directly with entering
the road/centre.
If an incomplete town entry has been con-
firmed, the town selection list appears.
2008
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required town.
If the entry made is unambiguous, you
can continue directly with entering the
road/centre.
29