Becker Surround; Subwoofer; Crossover - Becker CASCADE PRO Operation Manual

Becker Surround

You can use this function to activate vir-
tual surround sound and select the vehi-
cle size to optimise the surround sound
function.
Note:
The Becker Surround function is not
available for medium wave or short
wave.
! Select Becker surround in the sound
settings.
1019
! Select Becker surround and press the
rotary control/push button
switch virtual surround sound on ( )
or off ( ).
Select Large vehicle or Medium-sized vehi-
!
cle
(on = ).
Note:
Only one of the vehicle types in the list
can be active ( ).

Subwoofer

You can set the volume level of the
subwoofer output/
subwoofer output.
Select Subwoofer in the sound settings.
!
1024
! Turn the rotary control/push button
to select the required value.
Note:
A setting of "+10" indicates an increase
in the volume of the subwoofer.
Select off to deactivate the subwoofer
output.
to
In addition, Subwoofer
with the crossover setting.

Crossover

Use this function to set the threshold
deactivate the frequencies for the front loudspeakers,
the rear loudspeakers and the subwoofer.
Select
!
1025
! You may now select
Rear loudspeakers
Front loudspeakers
•
You can set the lower threshold
frequency of the front and rear
loudspeakers to a value of between
20 and 150 Hz.
is deactivated
• Subwoofer
You can set the upper threshold
frequency of the subwoofer to a value
of between 50 and 150 Hz.
General operation
Crossover in the sound settings.
Front loudspeakers
or Subwoofer .
Rear loudspeakers
and
,
off ,
21