Displaying Traffic Information - Becker CASCADE PRO Operation Manual

Displaying traffic information

Current traffic announcements can be
displayed in text form. There are several
options for requesting current traffic
information.
You can call up traffic announcements
via the navigation Options menu and by
pressing . Please refer to the
description in "Traffic announcements"
on page 52 and "Displaying traffic
announcements" on page 56.
Note:
If no up-to-date traffic information is
available, No čMC messages
on route are displayed.
In both cases, the Cascade displays a list
of the up-to-date traffic information cur-
rently available.
2069
All TMC messages are displayed.
Note:
Traffic announcements are displayed
sorted according to category and road.
Various symbols appear in front of each
traffic announcement to indicate the
category.
indicates a warning.
indicates building sites and other
obstacles.
and No čMC
indicates traffic jams in general.
To listen to all announcements, select
!
the Read out all messages
or
! Select the required announcement.
! Confirm your selection by pressing
the rotary control/push button
2084
The announcement appears in full.
! To listen to the announcement, select
the Read out
or
! Turn the rotary control/push button
to scroll through the traffic announce-
ment.
Note:
The reading out of traffic announce-
ments can be aborted by pressing the
rotary control/push button
A typical traffic announcement appears
entry. as follows:
• a motorway or road number
• Approximate direction information
• Detailed location and direction infor-
.
mation
• The event
• The cause, if known
Navigation mode
entry.
.
59