Saving/Deleting Route Options - Becker CASCADE PRO Operation Manual

! Turn the rotary control/push button
to select one of the following options:
Dynamic route ,
Quick route ,
Short route ,
Avoid motorway
,
Avoid tunnel
,
Avoid toll ,
Avoid ferry or
Ready
Turn the rotary control/push button
!
to switch the required function on ( )
or off ( ).
Note:
Only one of the three settings (
route , Quick route or Short route
active ( ) at the same time.
Dynamic route
•
The route is calculated taking into
account the traffic announcements
received.
If dynamic route guidance is active,
the routes are calculated on the basis
of the fastest route to the destination.
Notes:
• Dynamic route guidance is not possi-
ble in all countries at present.
• When new route calculations are
made with active dynamic route guid-
ance, the Cascade may request the
memory card containing the naviga-
tion data (if it is not already inserted).
• Quick route
With this setting, the route with the
shortest possible travel time to the
destination is calculated.
• Short route
With this setting, the route with the
Dynamic
shortest possible distance to the desti-
) may be
nation is calculated.
• Avoid motorway
and Avoid ferry
You can use these entries for example
to exclude ferries or motorways from
the route calculation. The Cascade
will then attempt to calculate a route
which does not contain any motor-
ways or ferries.
Notes:
• Routes without motorways can only
• Even if

Saving/Deleting route options

!
!
or
!
You can now start route guidance
, Avoid tunnel , Avoid toll
Navigation mode
be calculated for short distances (up
to 200 km depending on digitalisation
density).
Avoid toll is selected, toll roads
(e.g. in Switzerland or Austria) will
be included in the route calculation.
In the Route Options menu, select
Ready
.
Confirm your selection by pressing
the rotary control/push button
Press .
.
35