Advertisement
Quick Links
Code number entry
Remove portable panel
Inserting portable panel
Switch on / off
Adjust volume
Mute function
Activate tone menu
Adjust bass
Adjust treble
Adjust balance
Fader
Loudness on /off
Linear adjustment
Subwoofer output volume
Selecting reception optimisation
Selecting the operating mode
Selecting the waveband
Switching on radio menu mode
Setting procedures for transmitter selection
Dynamic autostore (FM DAS)
FM transmitter search
AM, LW, SW station search
Scan search
Direct frequency entry for FM
Direct frequency entry for AM, LW, SW
Programme type selection (PTY)
Switching PTY display on / off
52
Requesting/storing stations on FM STT
53
Requesting/storing AM, LW, SW stations
53
AM, LW, SW autostore
FM manual tuning
AM, LW, SW manual tuning
54
Regionalisation
54
Switching regionalisation on / off
54
Switching frequency display on / off
54
Switching radio text display on / off
55
Programme filtering
55
Deactivating the programme filter
55
Traffic Program (TP)
55
Activating/quitting the TP menu
56
Setting automatic tracking
56
Setting/deleting direct programming
56
Switching off TP
57
Mute function - switch on/off
Interrupting TP announcements
58
TP announcement volume
58
Telephone mute function
58
Time request
59
59
Cassettes - insert / eject
60
Track switching
60
60
61
61
61
61
62
62
63
63
63
64
64
65
65
66
66
67
68
68
68
69
69
69
69
70
70
71
71
49
Advertisement
Related Manuals for Becker Mexico Pro CC4527
Summary of Contents for Becker Mexico Pro CC4527
- Page 1 Scan search Direct frequency entry for FM Direct frequency entry for AM, LW, SW Programme type selection (PTY) Switching PTY display on / off Code number entry Requesting/storing stations on FM STT Remove portable panel Requesting/storing AM, LW, SW stations Inserting portable panel AM, LW, SW autostore FM manual tuning...
-
Page 2: Rds System
Radio operation during forward / rewind Setting the search mode (SEK) Fast forward / rewind GAL setting Music search - forwards / backwards Telephone mute characteristics (TEL) Dolby NR Setting right-hand or left-hand drive (DRV) Skip blank (COL) display colour setting (not for 4625) Scan search Favourite station settings (FAV) Cleaning the cassette mechanism... - Page 3 1 Volume control 9 CD/MD eject button ( 2 On / off switch ( 10 Right rotary control 3 Tone button ( 11 Multifunction buttons 4 Road traffic announcement button ( 12 Display 5 Infrared receiver 6 Function button 1. 7 Function button 2.
- Page 4 If the car radio is disconnected from the power supply, it is theft-protected upon reconnection. After switching on at the button, the prompt followed CODE, by 4 squares is displayed. The four-digit code must then be entered using the multifunction buttons “ - ”. Code number 1530 (the code number can be found on the enclosed CODE CARD).
- Page 5 As effective anti-theft device, the portable panel ( ) can be removed from the unit. Press and hold button (storage medium remains in the unit). The display folds forwards. The portable component can then be pulled out. The volume is limited to a maximum value after the display has been folded down.
- Page 6 Press button. Further on / off switching possibilities: Via ignition. In order to switch on via the ignition, the unit must previously have been switched off via the ignition. After switching off the ignition, the unit can be prevented from switching off by pressing the button within 3 seconds.
- Page 7 Press button and then multifunction button (under ) “ ” or “ ”. Set the desired bass via both buttons. Press both buttons simultaneously. Press button and then multifunction button (under ) “ ” or “ ”. Set the desired treble via both buttons. Press both buttons simultaneously.
- Page 8 Press button and then multifunction button “ ”. The loudness will switch Loudness is switched off for AM, LW and SW wavebands. Press and hold button until a signal tone sounds. The tone values for the set signal source (e.g. radio/FM) are set to an average value. Press and hold button until two signal tones sound.
- Page 9 Three different reception optimisation settings can be selected in order to suppress reception dependent interference and reflections. Press multifunction button „ “ in tone menu. Repeatedly press multifunction button “ ”, „ “ or “ ” in the tone menu until the desired optimisation is set.
- Page 10 Press function button 1. The operating modes (for connected CD/MD changer) can be selected. The last selected operating mode is set after the button is pressed for the first time. If the other operating modes are to be selected, press function button 1 quickly and repeatedly until the desired operating mode is selected.
- Page 11 The desired station can be selected via dynamic autostore, transmitter search, scan search, manual tuning, direct frequency entry and station buttons. In FM DAS mode, all receivable stations are displayed above the multifunction buttons arranged according to alphabetical order. The user menu (Page 85) explains how to set your favourite stations for selection according toalphabetical order.
- Page 12 Turn the right rotary control to the left/right. The radio searches in descending/ ascending order, according to selected search mode. To request the desired search mode in the user menu (also see page 83), refer to the setting information below: .
- Page 13 Select radio menu mode. Then press multifunction button “ ”. Use the multifunction buttons to enter the desired frequency. Only those numbers used for entry will be displayed. Select radio menu mode within the desired waveband. Use the multifunction buttons to enter the desired frequency. Only those numbers used for entry will be displayed.
- Page 14 : 27 frequencies or programmes can be stored on FM STT. To store the desired station or programme, press and hold multifunction button “ - ” for 2 - 4 seconds. Press multifunction button to access 10 - 27 of the available frequencies that can be stored.
- Page 15 Select desired waveband. Select radio menu mode. Then press multifunction button “ ” repeatedly until is displayed. The 10 transmitters with the best reception are stored under the station buttons in order of quality. The autostore storage plane is identified on the display by Select radio menu mode in order to quit the autostore storage plane.
- Page 16 The RDS diversity function is independent of region. If the RDS diversity function should switch among various regional programmes with diverse broadcast contents, the special regional sub-programme must be selected directly. A transmitter must first be selected in order to see if it broadcasts more than one regional programme.
- Page 17 Select radio menu mode. Then press multifunction button “ ” to switch frequency display ( ) or ( When the frequency display is on, the switched frequency of the selected RDS diversity transmitter is displayed. If the frequency display is ON, the time display automatically switches OFF (also see page 70).
- Page 18 You have the option of filtering various stations from the FM DAS transmitter list. First select FM radio menu mode. Then press multifunction button “ ” to switch the filter ( ). Switch back to the normal display; press and hold the multifunction button below the station to be filtered until appears on the display.
- Page 19 If an RDS diversity station transmits TP announcements, you can have CD/ MD/TAPE, CDC/MDC, AM, LW and SW operation interrupted and the transmitted TP announcements switched through. Moreover, you can listen to one FM station while having TP announcements switched through that are transmitted by another FM station.
- Page 20 Press and hold the button for longer than 2 seconds. Press and hold the button; otherwise, the TP menu will automatically disappear after 8 seconds if no further operations are performed. Press multifunction button “ ” repeatedly in the TP menu until appears.
- Page 21 Press and hold the button for longer than 2 seconds. Press multifunction button “ ” repeatedly in the TP menu until appears. TP is switched off after returning to normal display. After selection of a TP or EON transmitter, the mute function can be activated by pressing the button briefly.
- Page 22 The telephone characteristics can be set in the user menu (also see page 84) if a telephone system is installed in the vehicle and the mute function lead for the car telephone is connected to the car radio. When set to , the radio is switched to mute if a call is received.
- Page 23 Press button briefly; the display folds downwards and the cassette slot becomes visible. Push in cassette with tape-side to the right until it engages and press lightly. The cassette is drawn in automatically. Then fold the display up again. The unit switches automatically to cassette operation. appears on the display.
- Page 24 During cassette operation, fast forward / rewind can be activated using the multifunction buttons. In order to cancel the function, press or turn the right rotary control, or press the track switching buttons or the fast forward / rewind buttons. In order to activate the forward music search, turn the right rotary control to the right until the desired number of tracks to be skipped has been set.
- Page 25 If skip blank is active, automatic forward is activated at blank tape sections which are longer than 10 to 15 seconds. In order to activate the function, press the multifunction button “ ” repeatedly until is shown on the display. Press the right rotary control to start the scan search.
- Page 26 Sound interruptions may occur if the CD is dirty. In order to ensure optimum tone quality, please note the following: Always touch the CD at the edges only. Keep the disc clean and never touch the surface. Never stick anything to the CD. Protect the CDs against direct sunlight and from heat sources such as heaters etc.
- Page 27 Turn right rotary control to right / left. Through further turning of the right rotary control, several tracks can be skipped over in forward or backward directions. The device switches to the first track when the last track has been reached. Analogously, it switches from the last track to the first track.
- Page 28 By again pressing the multifunction button “ ”, the number of tracks and total playing time of the CD currently being played are displayed for approx. 10 seconds. If an MD is being played, only the number of tracks is displayed. The random play is activated by pressing the multifunction button “...
- Page 29 The unit is switched to select mode by pressing the multifunction button “ ”. is displayed. A track can be selected directly by using the multifunction buttons “ - ”. The unit switches back to CD menu mode if no buttons are actuated for approx. 8 seconds.
- Page 30 A CD/MD changer connected to the auto audio unit is ready for operation when there are CDs/MDs loaded. Close the sliding tray after loading. Further operation is performed via the car radio control panel. In order to remove the CD magazine, open the sliding cover on the changer and press the eject button.
- Page 31 Press function button 1 repeatedly until the CD/MD changer operation is switched on. The last CD/MD that was played is played from the position at which it was left before switching off. CDs/MDs can be selected via the multifunction buttons. During the selection time is displayed.
- Page 32 Press function button 2 in CDC mode. Then press multifunction button “ ”. The input menu appears on the display. In order to name a CD or revise an existing name, press the function button above ” “ (function button 1). Select the desired alpha characters using the multifunction buttons to the left and right of the abbreviation .
- Page 33 Press function button 2 in CDC mode. To filter the current CD title, briefly press the multifunction button “ ”. appears above the multifunction button, which means the filter is activated. Next press and hold the multifunction button “ ” for longer than 2 seconds. will appear briefly and will appear in the uppermost display line to indicate the filter that has been set for this title.
- Page 34 After requesting the user menu, the following basic settings can be selected according to your personal preference. user memory search mode speed-dependent volume control telephone characteristics LHD / RHD setting favourite station settings aux input setting display setting (not for 4625) display colour setting (not for 4625) quit user menu The user menu is requested by pressing and holding function button 2 for...
- Page 35 Request the user menu. Press multifunction button “ ” to select Frequency search Name search Transmitter chain search The GAL is a car radio control circuit, which automatically adjusts the car radio volume according to vehicle speed. This results in compensation of the driving noise produced at higher speeds.
- Page 36 If a telephone system with handsfree unit is installed in the vehicle, the telephone conversation can be conducted via the car radio system. Thus, installation of the normally required additional loudspeaker is not necessary. It is essential that the signal cables (AF - telephone input and earth - telephone input) are connected to the car radio (see page 94).
- Page 37 The favourite station setting allows you to program the stations in FM DAS according to listening preference rather than alphabetical order. For example, if the user selects a 2nd-level FM DAS menu station with a less powerful receiving signal, the station will be stored in 1st position in the FM DAS menu regardless of the receiving signal strength.
- Page 38 The display setting allows you to select among three different display versions. - Negative display ( - Positive display ( - Automatic display ( ) - the display will appear negative or positive depending on vehicle illumination. For selection, request user menu. Press multifunction button “ ”...
- Page 39 By repeatedly pressing the right rotary control, the following information can be requested in the service menu. display of model number display of serial number display of software status reset triggering for CDW or MDW (if present) display of current GAL adjustment data from CD drive (if present) In order to select the service menu, press button repeatedly (within...
- Page 40 There are two planes for remote control operation. The two planes are accessed by pressing the * button. Available at both planes: ON button switch on / off BD button select waveband MODE button select operating mode Available at first plane: Button 2 / increase volume Button 8 /...
- Page 41 LineOut Subwoofer Telephone mute / clearing function Permanent positive (terminal 30) Control output for automatic aerial / amplifier 7-12 Special connection for Becker CD changer / Illumination (terminal 58) Sony MD changer Switched positive (terminal 15) Earth (terminal 31)
- Page 42 A universal bracket for DIN installation slots is integrated into this car radio. An installation frame is not required. The unit is inserted into the installation slot and secured using the slides supplied. Complete the electrical connections. Then push the unit into the installation slot. Subsequently, push the slides into the apertures in the front of the unit to the first detent position (illustration A).
- Page 43 For removal, the unit must first be unlocked. For this purpose, push in both slides to the second detent position, as shown in illustration A. Subsequently, withdraw the unit with both slides (illustration C). Then remove the slides by pressing the springs on the right and left sides of the unit.
- Page 44 In frequency search mode, the receivable frequencies are searched for in descending/ascending order of frequency. Each receivable frequency is set. Tuning steps of 100 kHz are used for the search. In name search mode, all receivable and identifiable RDS programmes in FM can be selected in descending or ascending alphabetical order.
- Page 45 Specific types of program, such as e.g. sport, pop music, classical music etc., can be selected using the PTY function. The PTY is broadcast by the RDS transmitter, provided that the transmitter is equipped with this function. The selected transmitter program type can be displayed or a search of a specific PTY transmitter can be performed.
- Page 46 : Low active level < 2 Volt : 12 Volt : The Becker CD changer Silverstone (2660 or 2630), or the Sony MD changers MDX 60 and MDX 61 can be connected. : Only CDs which conform to DIN EN 60908 may be used.
- Page 47 Dear listener ! According to current EU guidelines, any person may operate this radio receiver. This unit conforms to the current valid European or harmonised national regulations. The designation is your guarantee of conformance to the applicable specifications concerning electromagnetic compatibility for the unit.