Setting The System Language; Displaying Voice Settings - Becker Mexico 7948 Operating Manual

Setting the system language

You can select the language for
announcements and displays here.
Notes:
• The memory card containing the nav-
igation data or system memory card
must be inserted in order to change
the language or voice. If necessary,
the Mexico will prompt you to insert
the navigation or system memory
card.
• It may take up to 10 minutes to install
the language.
• When the system language changes,
voice entries created for stations and
addresses are deleted.
Set system language
! Select
mode settings.
7004
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required language.
7005
The speaker selection list appears.
Turn the rotary control/push button
!
and then press the rotary control/push
button to select the required speaker.
Note:
• If other voices are available on an
inserted
language currently selected, then
these are also displayed in the list of
voices for this language (only affects
in the voice
navigation announcements).
• To update the voice dialogue, you
may be prompted to insert the system
memory card. If you are, insert it.
The language and the selected speaker
are installed.
memory card for the

Displaying voice settings

This function can be used to display the
currently valid voice settings.
Select Show settings in the voice mode
!
settings.
7006
The voice settings are displayed.
• MMI language: indicates the current
setting for the display text language.
• Navi speaker: indicates the current set-
ting for the navigation announcement
speaker.
• SDS: indicates the current setting for
the voice dialogue system speaker.
• TTS: indicates the current language
setting for reading out texts.
Settings
175